Masts & Mounts
Masts are an important component in network reliability.
Key factors to consider are:
- Mast deflection. High frequency antennas require rigid masts to prevent signal fluctuations in high winds
- Type and profile of the roof
- Ease of installation
- Longevity of the mast
- Impact on roofing integrity
Pacsat offer a range of masts to fit most installation required.
Common features of these masts are:
- Feet that pivot in 2 dimensions to fit any roof angle
- Support arms can be moved on the mast for maximum flexbility
- Hot dipped galvanised steel poles and feet
- Stainless steel hardware for a long service life
- Supplied as a set with minimum assembly required for fast installation
Mast Selection Table
| Series | Description | Prefix | Use | Product Code | Full Description | |
| U-Series | Medium rigidy mast, suitable for roof mounting small licensed antenna or all class-licenced antennas | UTIN | Suitable for tin, corrugated iron or wide-rib roofs | UTIN15 | 1.5 Metre 48mm OD Medium Rigidy Mast with Flat Mounting Plates | click here for details |
| - | - | - | - | UTIN25 | 2.5 Metre 48mm OD Medium Rigidy Mast with Flat Mounting Plates | click here for details |
| - | - | UCLP | Suitable for Klip-Lok style roofs | UCLP15 | 1.5 Metre 48mm OD Medium Rigidy Mast with Klip-Lok Plates | click here for details |
| - | - | - | - | UCLP25 | 2.5 Metre 48mm OD Medium Rigidy Mast with Klip-Lok Plates | click here for details |
| L-Series | High rigidity mast suitable for roof mounting licensed antenna or multiple class-licensed antennas | LTIN | Suitable for tin, corrugated iron or wide-rib roofs | LTIN20 | 2.0 Metre 76mm OD High Rigidity Mast with Flat Mounting Plates | click here for details |
| - | - | - | - | LTIN30 | 3.0 Metre 76mm OD High Rigidity Mast with Flat Mounting Plates | click here for details |
| - | - | LCLP | Suitable for Klip-Lok style roofs | LCLP20 | 2.0 Metre 76mm OD High Rigidity Mast with Klip-Lok Plates | click here for details |
| - | - | - | - | LCLP30 | 3.0 Metre 76mm OD High Rigidity Mast with Klip-Lok Plates | click here for details |
| P-Series | High rigidity mount suitable for wall mounting all antenna types | PPT | Stand-Off Wall Mount | PPT18S | 1.8 Metre 76mm OD High Rigidity Wall Mount with 180 mm offset from wall | click here for details |
| - | - | - | - | PPT18L | 1.8 Metre 76mm OD High Rigidity Wall Mount with 400 mm offset from wall | click here for details |
Notes:
All masts are hot-dipped galvanised steel with stainless steel hardware.
Masts shown are standard models. Custom heights are available.
Masts are provided as standard with two support legs. Additional support legs can be supplied as required.